| No. | Brand | d | S | L | J | C | G | l | F |
| 81140 | ISO | - | - | - | - | - | - | - | - |
| RT-753 | SIGMA | 1250 mm | - | - | - | - | - | - | - |
| 81214 | Toyana | 25.000 mm | - | - | - | - | - | - | - |
| 29417E | SNR | 95.000 mm | - | - | - | - | - | - | - |
| 22318EKF801 | SNR | - | - | - | - | - | - | - | - |
| 23130EMKW33 | SNR | 20 mm | - | - | - | - | - | - | - |
| T301 | Timken | - | - | - | - | - | - | - | - |
| 29356-M | NKE | 240.000 mm | - | - | - | - | - | - | - |
| F-83345 | INA | - | - | - | - | - | - | - | - |
| 21314VK | SNR | 20.000 mm | - | - | - | - | - | - | - |
| 300TMP12 | NSK | 480 mm | - | - | - | - | Tr 500x5 | - | - |
| K81236-M | NBS | - | - | - | - | - | - | - | - |
| RE 10020 | ISB | 55.000 mm | - | - | - | - | - | - | - |
| RE 20025 | ISB | - | - | - | - | 12 mm | - | - | - |
| 22324EMW33 | SNR | - | - | - | - | - | - | - | - |
| 29264 M | Toyana | - | - | - | - | - | - | - | - |
| NTH-4472 | KOYO | - | - | - | - | - | 129.692 mm | - | - |
| AXK 110145 | SKF | 280 mm | - | - | - | - | - | - | 329 mm |
| 2RT20006 | NTN | - | 0.794 mm | - | - | - | - | - | - |
| 2P6802K | NTN | - | - | - | - | - | - | - | - |
| K,81209TVP | KOYO | - | - | - | - | - | - | - | - |
| 24140EMW33 | SNR | 90.000 mm | - | - | - | - | - | - | - |
| 29334E | NACHI | 50 mm | - | - | - | - | 49.962 mm | - | - |
| RT15207 | NTN | 70 mm | - | - | - | - | - | - | - |
| 81103TN | SKF | 850 mm | - | - | - | - | Tr 850x7 | - | - |
| TC512 | INA | 70.000 mm | - | - | - | - | - | - | - |
| FAG 293/1250-E-MB Thrust roller bearings | Cap bolt recommended tightening torque:298.3 N·m; J min.:250.825 mm; Mass pillow block:24.5 kg; Da:150 mm; L:330.2 mm; End plug (suffix Y):EPR 9; H1:95.25 mm; Cap bolt:2 x 5/8-11 UNC; A2:195.262 mm; Initial grease fill:110.56 g; |
| Toyana 89326 Thrust roller bearings | Basic dynamic load rating C:468 kN; d1:119 mm; d:90 mm; Limiting speed:430 r/min; C:98 mm; D:220 mm; r, r3,4 min.:2.5 mm; r1,2 min.:4 mm; B:100 mm; Mass support roller:22.5 kg; |
| 300 mm x 480 mm x 37 mm NACHI 29360E Thrust roller bearings | D:100.0000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:1.50 mm; B:25.00 mm; Oil Speed Rating n2:7500 rpm; Basic Static Radial Load Rating Co:38000 N; d:35.000 mm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:60500 N; Size (mm):300 mm x 480 mm x 37 mm ; |
| 170 mm x 340 mm x 34,5 mm NBS 89434-M Thrust roller bearings | Oil Speed Rating n2:9500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20400 N; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:7000 rpm; Basic Dynamic Radial Load Rating C:28600 N; B:23.80 mm; Grease Speed Rating n1:7000 rpm; d:30.000 mm; D:62.0000 mm; Size (mm):170 mm x 340 mm x 34,5 mm ; |
| NTN 2P6802K Thrust roller bearings | B:19.355 mm; ra max.:3.5 mm; a:13.702 mm; Calculation factor Y:1.8; r1,2 min.:3.5 mm; Basic dynamic load rating C:58.2 kN; Calculation factor e:0.33; Ca min.:3 mm; rb max.:1.5 mm; D:57.15 mm; |
| 170 mm x 280 mm x 49,6 mm ISB 29334 M Thrust roller bearings | Basic Dynamic Radial Load Rating C:291000 N; B:90.00 mm; d:95.000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:2500 rpm; Oil Speed Rating n2:3200 rpm; Basic Static Radial Load Rating Co:325000 N; D:200.0000 mm; Size (mm):170 mm x 280 mm x 49,6 mm ; |
| FAG 29432-E1 Thrust roller bearings | r1 min.:0.6 mm; α:6 °; Basic dynamic load rating C:156 kN; B:35 mm; h:185 mm; l7 min.:58 mm; C1 max.:31 mm; d:50 mm; Mass rod end:3.3 kg; Specific dynamic load factor K:100 N/mm²; |
| INA 293/600-E1-MB Thrust roller bearings | r min.:3 mm; D1 ≈:176 mm; d:110 mm; C:128 mm; Maximum dynamic radial loads Fr max.:900 kN; Basic dynamic load rating C:765 kN; B:130 mm; Maximum static radial loads F0r max.:1290 kN; Basic static load rating C0:1060 kN; Mass bearing:48.2 kg; |
| NSK 65TMP12 Thrust roller bearings | Basic Static Radial Load Rating Co:88000 N; Accessories:One Seal & Snap-Ring; B:41.30 mm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:3200 rpm; Fillet Radius ra:1.50 mm; d:75.000 mm; Oil Speed Rating n2:4300 rpm; |
| INA 29438-E1 Thrust roller bearings | Fatigue load limit Pu:720 kN; Da min.:736 mm; s1 max.:45.7 mm; ra max.:5 mm; Ca min.:2.7 mm; Basic dynamic load rating C:5600 kN; Operating clearance factor k2:0.106; Misalignment factor k1:0.116; Da max.:797 mm; Reference speed:530 r/min; |
| 150 mm x 215 mm x 24 mm ISB 29230 M Thrust roller bearings | B2:39.5 mm; d:360 mm; r3,4 min.:5 mm; B1:21 mm; d1 ≈:423 mm; Mass angle ring:7.75 kg; Size (mm):150 mm x 215 mm x 24 mm ; |
| ISB ZR1.40.1385.400-1SPPN Thrust roller bearings | Basic dynamic load rating C:12.4 kN; d2:47.1 mm; Static axial stiffness, preload class C:73 N/µm; r3,4 min.:0.3 mm; d1:47.1 mm; Reference grease quantity Gref:1.44 cm³; Preload class A GA:45 N; Static axial stiffness, preload class D:103 N/µm; Preload class D GD:360 N; B:12 mm; |
| Timken T189W Thrust roller bearings | Basic Dynamic Radial Load Rating:20300 N; Basic Static Radial Load Rating Co:15300 N; Set Screw Size SSS:M6*0.75*5; Inner Width B:42.9 mm; Outside Diameter D2:72 mm; Dimension S:17.5 mm; Bore Diameter D:35 mm; Max Fillet Rad. MFR:1.0 mm; Weight W:0.46 kg; Dimension D3:46.10 mm; |
| SNR 22324EMW33 Thrust roller bearings | dc:146.05 mm; Bearing:23230 CC/W33; H2:63.5 mm; A2:238.125 mm; End plug (suffix Y):EPR 17; H1:160.35 mm; Cap bolt recommended tightening torque:359.3 N·m; Cap bolt:4 x 3/4-10 UNC; R1:95.25 mm; Ca:105.816 mm; |
| NKE 29356-M Thrust roller bearings | Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:1700 rpm; Basic Dynamic Radial Load Rating C:255000 N; D:360.0000 mm; Basic Static Radial Load Rating Co:315000 N; Fillet Radius ra:2.50 mm; B:56.00 mm; Oil Speed Rating Open/Shielded n2:2000 rpm; d:240.000 mm; Sealed Speed Rating n3:1000 rpm; |
| Toyana 29260 M Thrust roller bearings | Cap bolt, rec. tightening torque:350 N·m; bc:107.5 mm; Appropriate attachment bolt, size G:24 mm; L:510 mm; H1:170 mm; N1:28 mm; Mass housing:69.5 kg; J:430 mm; Da:280 mm; End cover:ETS 3036 R; |
Timken P-1739-C bearing
AST 6221-2RS bearing with long life in MyanmarGB Bearin... AST 6221-2RS bearing with long life in Myanmar can ensure high quality for more than 80% raw
Timken P-1739-C thrust roller bearings P-1739-C
Timken P-1739-C thrust roller bearings. Bearing No. P-1739-C. Size. 304.8x609.6x215.9 mm. Bore Diameter. 304,8 mm. Outer Diameter. 609,6 mm. Width
Bearing P-1739-C (Timken) | Size and Specification | Bearings
Cylindrical roller thrust bearings P-1739-C. Bearing number : P-1739-C. Size (mm) : 304.8x609.6x215.9. Brand : Timken. Bore Diameter (mm) : 304,8
Timken P-1739-C thrust roller bearings - SNR Bearing Argentina
YOU'LL FIND AN EXTENSIVE 7,5 mm rmin SELECTION OF SNR Bearing Argentina Timken P-1739-C thrust roller bearings FOR 460 mm d SALE
TIMKEN P-1739-C Bearing,TIMKENP-1739-C_Shanghai
We export high quantities TIMKEN P-1739-C Bearing and relative products, we have huge stocks for TIMKEN P-1739-C Bearing and relative items, we supply
P–1739–C - Timken CAD
Browse Part Number P–1739–C, Thrust Tapered Roller Bearings-Type TTHDFLSA in the The Timken Company catalog including Part Number,Item Name,UPC
Timken® P-1739-C | Eastern Industrial Automation
Timken® P-1739-C Type TTVS Thrust Screw Down Bearing, 12 in Dia Bore, 24 in OD, 8-1/2 in W
Thrust roller bearing P1739-C-TIMKEN - 304.8x609.6x215.9
Thrust roller bearing P1739-C-TIMKEN , dim : Ø int. 304.8 x Ø ext. 609.6 x th. 215.9 mm. SAME DAY SHIPPING. The specialist at your service for over 10 years
Timken P-1739-C Thrust roller bearings Video