| No. | Brand | d | S | L | J | C | G | l | F |
| RWCT19 | INA | 25.000 mm | - | - | - | - | - | - | - |
| 2RT12013 | NTN | - | - | - | - | - | - | - | - |
| RB 16025 | ISB | - | - | - | - | - | - | - | - |
| CRB 8016 | IKO | - | - | - | - | - | - | - | - |
| 29496E | NACHI | - | - | - | - | - | M 20x1 | - | - |
| 89326-M | INA | - | - | 466.725 mm | - | - | - | - | - |
| K.81216LPB | Timken | 35 mm | - | - | - | - | - | - | - |
| 29438 M | Toyana | 65.000 mm | - | - | - | - | - | - | - |
| 89412TN | SKF | 12.000 mm | - | - | - | - | - | - | - |
| CRBS 1308 | IKO | - | - | - | - | - | - | - | - |
| 29334E | NACHI | 50 mm | - | - | - | - | 49.962 mm | - | - |
| 2RT2034 | NTN | - | - | - | - | - | - | - | - |
| GS 89428 | SKF | 10 mm | - | - | - | - | - | - | 14 mm |
| 29396-E-MB | FAG | - | - | - | - | - | M 80x4 | - | - |
| 81222TN | NBS | - | - | - | - | - | - | - | - |
| 29424-E1 | FAG | 15 mm | - | - | - | - | - | - | - |
| XSI 14 0414 N | INA | - | - | - | - | - | - | - | - |
| F-83345 | INA | - | - | - | - | - | - | - | - |
| 29264 M | Toyana | - | - | - | - | - | - | - | - |
| K,81218LPB | KOYO | 80.000 mm | - | - | - | - | - | - | - |
| CRB 10020 UU | IKO | - | 0.794 mm | 139.7 mm | 111.125 mm | - | - | - | - |
| 2P13601 | NTN | - | - | - | - | 24 mm | - | - | - |
| 22328EMW33 | SNR | 30.000 mm | - | - | - | - | - | - | - |
| 293/1000-E-MB | FAG | 140 mm | - | - | - | - | - | - | 155 mm |
| 29432-E1 | FAG | 50 mm | - | - | - | - | - | - | - |
| RT-761 | SIGMA | 1.969 Inch | 50 Millimeter | - | - | - | - | - | - | - |
| 89414TN | SKF | 80 mm | - | - | - | - | - | - | - |
| 81217 | Toyana | 45.000 mm | - | - | - | - | - | - | - |
| ZR1.40.1385.400-1SPPN | ISB | - | - | - | - | - | - | - | - |
| 81115TN | SKF | - | - | - | - | - | - | - | - |
| FAG 293/1250-E-MB Thrust roller bearings | Cap bolt recommended tightening torque:298.3 N·m; J min.:250.825 mm; Mass pillow block:24.5 kg; Da:150 mm; L:330.2 mm; End plug (suffix Y):EPR 9; H1:95.25 mm; Cap bolt:2 x 5/8-11 UNC; A2:195.262 mm; Initial grease fill:110.56 g; |
| NTN 23324VS2 Thrust roller bearings | Pu:209 kN; D:160 mm; with tapered bore:2 500 min-1; Grease:265 kN; d:90 mm; with cylindrical bore:2 000 min-1; Dynamic (Cr):4.5 mm; Oil:30.220 kN; rs (min):2 mm; B:40 mm; |
| INA TC2031 Thrust roller bearings | S:4.763 mm; Cap bolt, SAE grade:5; P180°:81.4 kN; h:46.831 mm; R2:30.163 mm; Max. speed for PosiTrac Plus seal:1350 r/min; End plug (suffix Y):EPR 14; Ca:67.793 mm; ba:53.181 mm; P150°:66.7 kN; |
| 60 mm x 130 mm x 14 mm SKF 89412TN Thrust roller bearings | Fillet Radius ra:0.64 mm; B:10.00 mm; Oil Speed Rating n2:28000 rpm; Basic Static Radial Load Rating Co:3100 N; Basic Dynamic Radial Load Rating C:6890 N; Grease Speed Rating Open/Shielded n1:22000 rpm; d:12.000 mm; Accessories:Shield & Seal; Sealed Speed Rating n3:15000 rpm; Grease Speed Rating n1:22000 rpm; Size (mm):60 mm x 130 mm x 14 mm ; |
| ISO 292/710 M Thrust roller bearings | d:25.000 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; Sealed Speed Rating n3:8500 rpm; Basic Dynamic Radial Load Rating C:14000 N; Grease Speed Rating n1:12000 rpm; Fillet Radius ra:1.00 mm; B:15.00 mm; Oil Speed Rating n2:15000 rpm; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating Open/Shielded n2:15000 rpm; |
| ISO 29284 M Thrust roller bearings | Thin universal washer:AS 1730; Universal washer:LS 1730; Basic static load rating C0:40.5 kN; D:33 mm; d:17 mm; Reference speed:4500 r/min; Eb max.:29 mm; B1:3.5 mm; Limiting speed:9500 r/min; Fatigue load limit Pu:4.75 kN; |
| 200 mm x 260 mm x 25 mm ISB RE 20025 Thrust roller bearings | Reference speed:11000 r/min; C:12 mm; Designation bearing:BK 2212; Fatigue load limit Pu:1.56 kN; Radial shaft seal with a low cross-sectional height, double lip:SD 22x28x4; Mass bearing:0.018 kg; C1 min.:9.3 mm; Limiting speed:12000 r/min; Inner ring IR series:IR 17x22x13; Basic dynamic load rating C:8.8 kN; Size (mm):200 mm x 260 mm x 25 mm ; |
| 170 mm x 340 mm x 34,5 mm NBS 89434-M Thrust roller bearings | Oil Speed Rating n2:9500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20400 N; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:7000 rpm; Basic Dynamic Radial Load Rating C:28600 N; B:23.80 mm; Grease Speed Rating n1:7000 rpm; d:30.000 mm; D:62.0000 mm; Size (mm):170 mm x 340 mm x 34,5 mm ; |
| 70 mm x 150 mm x 16 mm SKF 89414TN Thrust roller bearings | r3,4 min.:2.1 mm; d1 ≈:110.45 mm; B1:11 mm; d:80 mm; Mass angle ring:0.44 kg; B2:17 mm; Size (mm):70 mm x 150 mm x 16 mm ; |
| INA K89460-M Thrust roller bearings | Lock nut:N 07; B1:36.805 mm; Lock washer:W 07; G:34.95 mm; d3 max.:52.527 mm; d1:28.575 mm; Mass adapter sleeve assembly:0.16 kg; B:11.379 mm; d:35 mm; Threads per inch:18; |
| 150 mm x 215 mm x 24 mm ISB 29230 M Thrust roller bearings | B2:39.5 mm; d:360 mm; r3,4 min.:5 mm; B1:21 mm; d1 ≈:423 mm; Mass angle ring:7.75 kg; Size (mm):150 mm x 215 mm x 24 mm ; |
| ISB YRT 650 Thrust roller bearings | B1:440 mm; d1:600 mm; G1:40 mm; Hydraulic nut:HMV 134 E; Nut for removal:HM 31/670; G:Tr 670x6; Mass withdrawal sleeve:139 kg; B2:466 mm; d:630 mm; A:9 mm; |
| NTN 2RT12013 Thrust roller bearings | Basic Interchange NDH:-; Accessories:Mast Guide Type- 208; Basic Radial Load Rating-Dynamic DC:11800 lbf; Basic Interchange NSK:-; Basic Interchange SPLIT:TB104; Basic Interchange BCA:MG207FFH; Basic Interchange MCGILL:BB1705; Basic Interchange:-; Basic Radial Load Rating-Static SCO:48600 lbf; |
| NSK 40TMP93 Thrust roller bearings | dc:106.362 mm; h:45.244 mm; Pa:46.7 kN; J1:69.85 mm; P180°:72.5 kN; da:110 mm; RG:3/8 NPT; J min.:320.675 mm; Cap bolt recommended tightening torque:298.3 N·m; H:244.475 mm; |
| FAG 29438-E1 Thrust roller bearings | B:42 mm; r1,2 min.:3 mm; Ca min.:7 mm; Da max.:119.5 mm; Mass bearing:2.48 kg; D:130 mm; d:70 mm; Calculation factor Y0:1; d1 ≈:98.15 mm; C:35 mm; |
| 130 mm x 190 mm x 25 mm ISB CRB 13025 Thrust roller bearings | Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Tolerance housing:H7 m/s; d:75 mm; Specific dynamic load factor K:40 N/mm²; Specific static load factor K0:120 N/mm²; Permissible sliding velocity v max.:1 m/s; B:60 mm; Size (mm):130 mm x 190 mm x 25 mm ; |
Bearing 81116 (SIGMA) | Size and Specification | Bearings
Cylindrical roller thrust bearings 81116. Bearing number : 81116. Size (mm) : 80x105x19. Brand : SIGMA. Bore Diameter (mm) : 80. Outer Diameter (mm) : 105
Poly(acrylic acid sodium salt) - Sigma-Aldrich
... Number: 9003-04-7; Synonym: Poly(sodium acrylate), Sodium polyacrylate; find Supelco-81116 MSDS, related peer-reviewed papers, technical documents,
SIGMA 81116 Rolamentos de rolos 81116
SIGMA 81116 Rolamentos de rolos. Bearing No. 81116. Size. 80x105x19 mm. Bore Diameter. 80 mm. Outer Diameter. 105 mm. Width. 19 mm d. 80 mm. D
Buy SIGMA 81116 thrust roller bearings - NTN Wälzlager
SIGMA 81116 thrust roller bearings. What are 4.39 Hz Characteristic inner ring frequency, BPFI the dimensions 7.75 kN Dynamic load, C of 120 °C Max
SIGMA 81116 thrust roller bearings - AMERICAN NTN
Brand Name: SIGMA. Model Number: 81116. Diameter series symbol: Used for Light load. Unit, Type: Insert Bearing Unit. Surface Treatment: No. d: 20. Bearing
Microbial Safety in Water Resources
Strain 81116 cultured on TSA-Blood agar at 42◦C for 2 days was suspended in 100 ... 15 μg of RNA was labeled with amino-allyl dUTP (Sigma) during reverse
SIGMA 81116 thrust roller bearings - 81116 bearing
QuestionSIGMA 81116 thrust roller bearings ? Find NSK Brand what you need 240 mm d faster by entering your Thrust Roller Bearings information . 2,1 mm r
SIGMA 81116 thrust roller bearings - 81116 bearing
Advance SIGMA 81116 thrust roller bearings is your source for quality thrust roller bearings 30x40x20 and accessories. shop online for home delivery or pick up
SIGMA 81116 Thrust roller bearings Video