| No. | Brand | P | S | f | G | H | L | Z | n |
| 1302 | NSK | - | 17 mm | - | - | - | - | - | - |
| 1213 K | NSK | - | - | - | M6x1 | 178 mm | 220 mm | - | - |
| 2202-2RSTN9 | ISB | - | - | - | - | - | - | - | - |
| 2303-2RSTN9 | ISB | - | - | - | M6x1 | - | - | - | - |
| 2206 | Toyana | - | - | - | - | - | - | - | - |
| 2316 | NACHI | - | 8.5 mm | - | M6x1 | - | - | - | - |
| 1213 | NSK | - | - | - | - | - | - | - | - |
| 1320 | KOYO | - | 22.2 mm | - | - | - | 140 mm | - | - |
| 1208 | NKE | - | 8 mm | - | R1/8" | - | - | - | - |
| 2205E-2RS1KTN9 | SKF | - | - | - | - | - | - | - | - |
| 1307 | NKE | - | - | - | M10x1 | - | - | - | - |
| 1301G14 | SNR | - | - | - | - | 117 mm | - | - | - |
| NMJ 6E | SIGMA | - | - | - | M6x1 | 80 mm | - | - | - |
| 2303 | ISO | - | - | - | - | - | - | - | - |
| 1209 | FBJ | - | - | - | - | - | - | - | - |
| 108 | ISO | - | - | - | R1/8" | 238 mm | 138 mm | - | - |
| 1213-K | NKE | - | - | - | 1/4"-28 | - | - | - | - |
| TSF 30 BB-O | ISB | - | 11 mm | - | R1/8" | 53.9 mm | - | - | - |
| 2206-2RS | ZEN | - | - | - | - | - | - | - | - |
| 1405 M | SIGMA | - | - | - | - | - | - | - | - |
| 2217K+H317 | Toyana | - | - | - | M6x1 | 89 mm | 94 mm | 44.3 mm | - |
| 2309S | NTN | - | - | - | M6x1 | 120 mm | - | - | - |
| 2206-K-2RS-TVH-C3 + H306 | FAG | - | - | - | - | - | - | - | - |
| 1205 | Toyana | - | - | - | - | - | 135 mm | - | - |
| 2211 KTN9+H311 | ISB | - | 11 mm | - | R1/8" | 150 mm | - | - | - |
| 2206 | NACHI | - | - | - | M6x1 | - | - | - | - |
| 85 mm x 180 mm x 41 mm KOYO 1317K Self aligning ball bearings | N1:21 mm; Designation of housing:PE207N-; d:36.51 mm; Z:58.9 mm; N:14mm; Dz:80 mm; A1:27 mm; T min.:-40 °C; G:R1/8"; Recommended tightening torque for set screw:8 Nm; Size (mm):85 mm x 180 mm x 41 mm ; |
| 15,875 mm x 46,0375 mm x 15,875 mm RHP NMJ5/8 Self aligning ball bearings | J:100 mm; d:31.75 mm; S:8 mm; e:10 mm; N:12mm; A2:32 mm; A4:23 mm; L:125 mm; C0:11.2 kN; C:19.5 kN; Size (mm):15,875 mm x 46,0375 mm x 15,875 mm ; |
| 20,000 mm x 47,000 mm x 18,000 mm SNR 2204KEEG15 Self aligning ball bearings | End Cap Groove:Yes; Ball Grade:Class 10; Bearing Insert Material:Steel; Self Aligning:Self Centering; Bearing Locking Device:Setscrew; Bearing Family:Setscrew Ball Bearin; Max Bearing Speed:6500 rpm; Brand:Baldor-Dodge; Grease Type:Unirex N2; Flinger Type:Rubberized; Size (mm):20,000 mm x 47,000 mm x 18,000 mm ; |
| 30,000 mm x 72,000 mm x 52 mm SNR 11306G15 Self aligning ball bearings | d:15 mm; T min.:-20 °C; T max.:200 °C; Recommended tightening torque for set screw:5.5 Nm; L:60 mm; C0:6.65 kN; s1:30.5 mm; N:12mm; B:34 mm; J:90 mm; Size (mm):30,000 mm x 72,000 mm x 52 mm ; |
| 25 mm x 52 mm x 18 mm SKF 2205E-2RS1KTN9 Self aligning ball bearings | Inch - Metric:Metric; Harmonized Tariff Code:8482.50.00.00; Noun:Bearing; outer ring width:43 mm; Internal Clearance:C3-Loose; bore type:Straight; Rolling Element:Cylindrical Roller B; bearing material:Hardened Alloy Steel; E:165 mm; Max operating temperature, Tmax:120 °C; Size (mm):25 mm x 52 mm x 18 mm ; |
| 12,000 mm x 37,000 mm x 12,000 mm SNR 1301G14 Self aligning ball bearings | N2:49 mm; L2:16 mm; Designation of bearing:US209-27G2T20; Designation of open end cover:SCOU209-27; H1:102 mm; s1:20.6 mm; A2:35 mm; H:117 mm; C0:20.8 kN; C:31.85 kN; Size (mm):12,000 mm x 37,000 mm x 12,000 mm ; |
| Toyana 1302 Self aligning ball bearings | Designation of housing:PE211N-; L:222 mm; Designation of bearing:UC211-35G2T20; L1:68 mm; d:55.56 mm; Designation of open end cover:SCOU211-35; Designation of closed end cover:SCC211; H1:22.5 mm; H2:124.5 mm; A1:35 mm; |
| 5 mm x 19 mm x 6 mm NSK 135 Self aligning ball bearings | T min.:-20 °C; A1:9 mm; Designation of bearing:UC208-24G2; Dz:88 mm; Recommended tightening torque for set screw:8 Nm; Z:55.7 mm; Designation of closed end cover:SCC208; G:M6x1; C:29.6 kN; A:36 mm; Size (mm):5 mm x 19 mm x 6 mm ; |
| ISB TSM 15-01 BB-E Self aligning ball bearings | G:R1/8"; Designation of bearing:US211-32G2T04; C:43.55 kN; S:11.8 mm; N1:30 mm; H2:124.5 mm; L1:68 mm; Designation of housing:PE211N-; Z:77.7 mm; Weight:3.51 kg; |
| 60 mm x 130 mm x 46 mm KOYO 2312 Self aligning ball bearings | C0:11.2 kN; J:60 mm; Designation of bearing:EX206-18G2T04; d1:44.1 mm; B:36.4 mm; L:85 mm; G:M6x1; Weight:1.23 kg; Recommended tightening torque for set screw:8 Nm; L1:25 mm; Size (mm):60 mm x 130 mm x 46 mm ; |
| 70 mm x 125 mm x 31 mm KOYO 2214 Self aligning ball bearings | L1:27 mm; C:14 kN; S:17.4 mm; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; Dz:60 mm; L:84 mm; Designation of open end cover:SCOE205-25; Designation of bearing:EX205G2L4; B1:44.3 mm; Size (mm):70 mm x 125 mm x 31 mm ; |
| Toyana 1212K+H212 Self aligning ball bearings | T max.:100 °C; d1:82 mm; A:64 mm; B:61.8 mm; A5:30.9 mm; SW:4.76 mm; G:M6x1; L:194 mm; L1:119 mm; B1:77.7 mm; |
| 55 mm x 100 mm x 21 mm FAG 1211-K-TVH-C3 Self aligning ball bearings | Seal Type:Single Lip; Ball Bearing Housing Series:206 Series; Flinger Material:None; Ball Material:Steel; Bearing Locking Device:Eccentric Collar; Grease Type:Unirex N2; Bearing Outer Ring Material:Steel; Flinger Type:None; Bearing Inner Ring Material:Steel; Housing Type:2 Bolt Flange; Size (mm):55 mm x 100 mm x 21 mm ; |
| 15 mm x 35 mm x 11 mm KOYO 1202 Self aligning ball bearings | d:60 mm; A1:16 mm; Z:89.5 mm; A:53.5 mm; S:12 mm; Recommended tightening torque for set screw:22 Nm; T max.:200 °C; A2:71.3 mm; e:34 mm; Designation of open end cover:SCOE212-60; Size (mm):15 mm x 35 mm x 11 mm ; |
| 12 mm x 32 mm x 12 mm NMB PBR12EFN Self aligning ball bearings | a:23.75 mm; Nref:4,800 rpm; d:45 mm; Db min:83.5 mm; Characteristic inner ring frequency, BPFI:10.32 Hz; d1:66 mm; Characteristic outer ring frequency, BPF0:7.68 Hz; r1a max:1.5 mm; Y2:1.01; Characteristic cage frequency, FTF:0.43 Hz; Size (mm):12 mm x 32 mm x 12 mm ; |
| Toyana 2321K Self aligning ball bearings | A2:21 mm; N1:16 mm; N2:32 mm; d:19.05 mm; Weight:0.76 kg; B:31 mm; SW:3.18 mm; L3:51 mm; H2:51 mm; C0:6.8 kN; |
ISO/TC 108/WG 34 - BIPM
ISO/TC 108/WG 34 is the Working Group 34 of the ISO/TC 108 Mechanical vibration, shock and condition monitoring, which scope is defined as: Standardization
ISO/TC 108/SC 5 - Condition monitoring and diagnostics ... - ISO
ISO/TC 108/SC 5. Condition monitoring and diagnostics of machine systems. About. Secretariat: SA
Report on ISO/TC/108 Mechanical Vibration and Shock—77(1
in the International Organization for Standardization (ISO) and Interna- ... TC 108/SC 1 approval of ISO/DIS 2953 "Balancing machines--De- scription and
ISO TC 108/SC
ISO. 7626-1. Second edition. 2011-07-15. Mechanical vibration and shock — ... ISO 7626-1 was prepared by Technical Committee ISO/TC 108, Mechanical
ISO TC 108/SC - SiS
Apr 15, 2011 - ISO's member body in the country of the requester. ... ISO 18437-5 was prepared by Technical Committee ISO/TC 108, Mechanical vibration,
Report of the ISO TC 108 Observer - BIPM
the standards developed in ISO/TC 108/SC 3 (in Working Group WG 6: ... 108 Mechanical vibration, shock and condition monitoring responded to the need for
INTERNATIONAL STANDARD 108
UDC 677.054. Ref. No. ISO 108-1976 (E). Descriptors. : textile machinery , looms, definitions, orientation, right side, left side, designation. Price based on 1 page
ISO/TC 108 - Mechanical vibration, shock and condition ... - ISO
ISO/TC 108. Mechanical vibration, shock and condition monitoring. About. Secretariat: ANSI
8 mm x 22 mm x 7 mm ISO 108 Self aligning ball bearings Video